SoftTouch Stay Down Indoor Base

  • 15” x 15” x 3” regulation size
  • Includes 3 plates for all skill levels
  • Durable one piece rubber cover
  • Up to 50 Weight Force
  • Ground anchor NOT included

Van's Enterprises, LTD.  -  90 Le Baron Street, Waukegan, IL 60085
Phone: 847-367-7828  -  Email: info@vansenterprises.com 
Visit our sand channel drainage website: http://www.sandchanneldrainage.com/ 
Copyright ©. Van's Enterprises Ltd.. All rights reserved.

  • For Bolco Bases
  • Top quality steel
  • 1 1/2” x 1 1/2” female receptacle, 9” long
  • Zinc-plated plus special rust inhibitors
  • Use with 255-BATM
  • Vinyl covered
  • Bonded polyurethane padding
  • Strapless bases easily bolted to anchor plate
  • Regulation size:  15” x 15” x 3”

100-ML Bolco Major League Model

6185-EBA Bolco Economy Magnetic Base Set

SoftTouch Soft Touch Base

  • Rubber covered
  • Pro Style Base with Metal Pan
  • Universal Stanchion
  • Regulation size:  15” x 15” x 3”
  • Converts stationary bases to Progressive Release(tm) bases without replacing existing ground anchors
  • Tee fits both 1” and 1 1/2” ground anchors
  • Major League style base
  • Both 14" and 15" bases available
  • Modular one piece all rubber construction
  • Tapered sides
  • Heavy gauge non-collapsible textured white rubber
  • Aluminum stanchion fits both male and female ground anchors

227-FAS

SoftTouch Stay Down Convertible Base

150-SB Bolco Base

  • One piece all rubber construction
  • Modular heavy gauge non-collapsible textured white rubber
  • Aluminum stanchion fits both male and female ground anchor
  • Regulation size:  15” x 30” x 3”
  • For Bolco Bases
  • Top quality steel
  • 9” long and 1” square
  • Zinc-plated Plus Special Rust Inhibitors
  • Use with 6245-BAT 

205-BA Bolco Base Anchor

6200-ML Bolco Major League Model

110-DBL Bolco Base

WARNING: Van's Enterprises Ltd. advises that sliding into a base represents a clear and present danger.  Injury may occur.

  • Molded 7” stem fits into a ground mount
  • “Progressive Release(tm)” base,
  • Soft vinyl base absorbs impact and “pops-out” on impact
  • Both 14" and 15" bases available 
  • Base anchor for Bolco Bases
  • Set of 3 anchor stakes, 3 anchor plates
  • Anchors to 100-ML and 120-Pro bases 

Save time/less hassle:

CH System allows you to install a base anchor in about 5 minutes. You no longer have to pour concrete, dig a hole and hope that nothing happens to it (like erosion, freezing & thawing, worst of all hitting with an implement). If this happens to CH’s Anchors it takes only a few minutes with the CH Driver to reposition, and you’re back playing ball.

Durable:
CH Anchors are made of heavy duty steel, and weigh 5 lbs. each. CH Anchors on average will last 5—10 times longer than the anchors you are used to. THE CH ANCHOR AND DRIVER SYSTEM IS BUILT TO LAST FOR MANY YEARS OF HARD USE.

Save money/less cost:
Time saved alone using the CH System is enough to outweigh the cost concrete anchors.

Compatibility:
CH Anchors are designed to fit Hollywood (1 1/2 inch) and Bolco ( 1 inch ) standard bases.

230-SP Bolco Stake Plug

  • Base anchor for Bolco Bases
  • 3  -  227-FAS Stakes
  • 3  -  255 BATM Plates

175-MLB Bolco Major League Model

Baseball field managers in Chicagoland and northern Illinois, get pro-quality bases and get your field ready to play today!  Van's Enterprises has many options available, including Bolco's Major League 100 model.  We are the Illinois distributor for Bolco and AFP bases.  We also install base anchor systems for your ballfields.  Remember to order your home plate and pitching rubber too!

  • 15” x 15” x 3” regulation size
  • Includes 3 plates for all skill levels
  • Durable one piece rubber cover
  • Up to 50 Weight Force
  • Ground anchor NOT included

211-BA Bolco Base Anchor

  • 1” x 1” Orange plug fits over 1” stake and into 1 1/2” ground stake
  • One piece all rubber construction
  • Modular heavy gauge non-collapsible textured white rubber
  • Aluminum stanchion fits both male and female ground anchor
  • Regulation size:  15” x 15” x 3”
  • Both fielder and runner have their own base, helping to reduce chance of collision at first base
  • Uses Stay Down Convertible ground anchor to fit existing 1” stake or 1 1/2” sleeve

255-BATM

  • Fits Male or Female anchor Stakes
  • For Bolco Bases
  • Top quality steel
  • 1 Top Plate only
  • Use with 227-FAS 

225-BAS

CH Base Anchor & Driver System

6185-O-S Bolco Economy Magnetic First Base

SoftTouch Double First Base

BASES & ANCHORS

6245-BAT

  • Fits male anchor stakes
  • For Bolco Bases
  • Intermediate Model
  • 1 Top plate only
  • Use with 225-BAS 
  • Use your “real base” for indoor practice
  • Suction cups on Tee allow for indoor practice